module RegisterFile(
	input  reset                    , 
	input  clk                      ,
	input  RegWrite                 ,
	input  Regwrite2				,
	input  [5 -1:0]  Read_register1 , 
	input  [5 -1:0]  Read_register2 , 
	input  [5 -1:0]  Write_register ,
	input  [5 -1:0]  Write_register2,
	input  [32 -1:0] Write_data     ,
	input  [32 -1:0] Write_data2    ,
	output [32 -1:0] Read_data1     , 
	output [32 -1:0] Read_data2
);

	// RF_data is an array of 32 32-bit registers
	// here RF_data[0] is not defined because RF_data[0] identically equal to 0
	reg [31:0] RF_data[31:1];
	
	// read data from RF_data as Read_data1 and Read_data2
	assign Read_data1 = (Read_register1 == 5'b00000)? 32'h00000000: RF_data[Read_register1];
	assign Read_data2 = (Read_register2 == 5'b00000)? 32'h00000000: RF_data[Read_register2];
	
	integer i;
	// write Wrtie_data to RF_data at clock posedge
	always @(posedge reset or posedge clk)
		if (reset)
			for (i = 1; i < 32; i = i + 1)
				RF_data[i] <= 32'h00000000;
		else
		begin
		if (RegWrite && (Write_register != 5'b00000))
			RF_data[Write_register] <= Write_data;
		if (Regwrite2 && (Write_register2 != 5'b00000))
			RF_data[Write_register2] <= Write_data2;
		end
endmodule