fixed some BUGs

This commit is contained in:
clf3 2023-09-08 21:41:54 +08:00
parent b5f240f1b2
commit 209f13c5b4
2 changed files with 11 additions and 5 deletions

View File

@ -7,11 +7,12 @@
RF24 radio(7,8);//端口可能要改
SoftwareSerial sendingSerial(5,6);
String sending="";
const int Rp=0,Rr=1,interval=20;//Rp,Rr 分别为两个遥杆的接口
const int Rp=0,Rr=1,interval=100;//Rp,Rr 分别为两个遥杆的接口
long propeller=0,rudder=0,dist;//propeller为螺旋桨0-1023512为静止rudder为舵0-1023512为静止
long sending_signal=0;//发送的信号
long response=0;
const byte addresser[6]={"00001"};//创建通信通道地址6用来写8用来读
long time=0;
void setup() {
Serial.begin(9600);
sendingSerial.begin(38400);
@ -19,12 +20,14 @@ void setup() {
//radio.setChannel(114);//设置信道114号通道
radio.openWritingPipe(addresser);
radio.openReadingPipe(1,addresser);
radio.setPALevel(RF24_PA_HIGH);
radio.setPALevel(RF24_PA_MIN);
Timer1.initialize(interval);
Timer1.attachInterrupt(send);
radio.startListening();
}
void send(){
time=millis();
//Serial.println("send");
sending_signal=0;
radio.stopListening();
propeller=analogRead(Rp);
@ -43,11 +46,13 @@ void send(){
// Serial.println(rudder);
// Serial.println(sending_signal);
radio.startListening();
//Serial.println(millis()-time);
}
void loop() {
// put your main code here, to run repeatedly:
Serial.println("loop");
if(radio.available()){
Serial.print("response:");
radio.read(&response,sizeof(response));
Serial.println(response);
if(response%1000000==1){

View File

@ -59,12 +59,13 @@ void setup()
pinMode(A1,INPUT);
pinMode(A2,INPUT);
MyServo.write(angle);
RadarServo.write(0);
radio.begin();
//radio.setChannel(114);
radio.openReadingPipe(1,addresses); //接收通道,
radio.openWritingPipe(addresses);//发送通道
radio.setPALevel(RF24_PA_HIGH); //设置功率放大器级别,将其设置为最小值
radio.setPALevel(RF24_PA_MIN); //设置功率放大器级别,将其设置为最小值
delay(1000);
MyServo.write(45);
}
@ -178,7 +179,7 @@ void loop() {
//send clear
response=2000000;
}
radio.write(response,sizeof(response));
radio.write(&response,sizeof(response));
//delay(20-distance/17);
Serial.println(distance);
}